Климатическое оборудование продажа и монтаж в СПБ
Smoke and heat extract unit + normal ventilation
Horizontal exhaust
Up to 400°C / 120 min (F400/120, F400/90, F300, F200)
Normal ventilation up to 120°C continuous operation
Service switch serial
Suitable for coastal applications
Snow load class SL 1000 (suitable for heated or unheated buildings up to SL 1000)
Wide range of accessories
Tested acc. to EN 12101-3 at LGAI, Barcelona
CE-certified acc. to EN 12101-3 at BSI, UK
DVG smoke and heat extract fans are used in case of fire to extract smoke gases from rooms, and also during normal working conditions for standard ventilation. Smoke-free escape ways increase the chances to rescue people in case of fire.
The casing is manufactured from seawater resistant aluminium. The base frame is made of pre-galvanised steel, zinc-magnesium (ZM) coated. Impeller with backward-curved blades is manufactured from pre-galvanized steel (sizes 355, 450), respectively from steel, welded and galvanised. Motor outside air stream is cooled with fresh air.
Electric motor of
IE1 standard efficiency, single or two speed, respectively IE2 high efficiency single speed motor at 4 and 6 pole fans from 0,75 kW output power.
PTC serial built-in. For two speed fans (up to 4 kW) two speed switch is available as accessory (in this case thermal contact must be ordered; not suitable for PTC or without thermal contact). In case of fire eventual two speed switch and all motor protective devices must be bridged to guarantee functional capability (connection direct to the mains). For speed control use only frequency converter (please see instructions for details). Not suitable for voltage control. If frequency converter used in case of fire, PTC must be bridged and switching on max. speed even after eventual short supply cut off assured. Operating over 50 Hz is allowed at units on request only. At frequency controlled units additional EMC protection could be needed (on request).
}} "KDRE 45**")
}} "KDRE 55**")
}} "KDRE 65**")
}} "MUB 025 315E4 sileo-20")
}} "MUB 025 355DV sileo Multibo-20")
}} "MUB 025 355E4 sileo Multibo-20")
}} "MUB 042 400DV sileo Multibo-20")
}} "MUB 042 400E4 sileo Multibo-20")
}} "MUB 042 450DV sileo Multibo-20")
}} "MUB 042 450E4 sileo Multibo-20")
}} "MUB 042 499E4-A2 Multibox**-20")
}} "MUB 042 500D4 IE2 Multibox")
}} "MUB 042 500D4 Multibox")
}} "MUB 042 500E4 sileo Multibo-20")
}} "MUB 062 560D4 IE2 Multibox")
}} "MUB 062 560D4 IE3 Multibox-20")
}} "MUB 062 630D4 IE3 Multibox-20")
}} "MUB 062 630D6 IE2 Multibox")
}} "MUB 062 630DV sileo Multibo-20")
}} "MUB 100 630D4-L IE2 Multibox")
}} "MUB 100 710D6 IE3 Multibox-20")
}} "Электрокалорифер Systemair CB 125-1,2 230V/1 Duct heater")
}} "ISE 355/400 Flexible connect.")
}} "UGS 042/500 adapter flex 120°C")
}} "DE 60x35 dropelemin. PGK/DXRE")
}} "VBC 160-3 Water heating batt")
}} "EVH 710 flex.conn. AXC 400°C")
}} "RSA 355/355/070 (F)")
}} "MFA-AXCBF 500 mounting foot")
}} "WSD AxZent 450")
}} "Приточно-вытяжная установка O.ERRE TEMPERO 100")
}} "Приточно-вытяжная установка O.ERRE TEMPERO 100 PH")
}} "Приточная установка Ostberg SAU 125 С1")
}} "Приточная установка Ostberg SAU 200 B3")
}} "Приточная установка Ostberg SAU 250 Е1")
}} "Приточная установка Ostberg SAU 200 B1")
}} "Приточная установка Ostberg SAU 200 C3 Erp")
}} "Вентиляционная установка Компакт 1109М")
}} "Вентиляционная установка Компакт 1112М")
}} "Вентиляционная установка Компакт 1115М")
}} "Вентиляционная установка Systemair SAVE VTR 700 R")
}} "Вентиляционная установка Systemair SAVE VTR 500 L")
}} "Вентиляционная установка Systemair SAVE VTR 300/B L")
}} "Вентиляционная установка Systemair SAVE VTR 700 L")
}} "Вентиляционная установка Systemair SAVE VTR 250/B L 500W")
}} "Фильтр вентиляции EU4-500 LuxSB")
}} "Фильтр EU4-500 Lux")
}} "Фильтр Filter-Case-500")
}} "Фильтр F7-Fine")
}} "Фильтр F7-Carbon")
}} "Фильтр 550 DIST-4-0-0")
}} "Фильтр 550 DIST-4-3-220")
}} "Фильтр 550 DIST-4-4-24")
}} "Фильтр EU4-1000 Aqua")
}} "Фильтр EU4-1000")